Latest versions come with fiberglass cowls! The Bucker Jungmann was the trainer used by the German Luftwaffe to train most of their World War II pilots. This is a beautiful rendition of this airplane. With lots of wing area, this ARF is docile and a stable performer. You will not be disappointed. Some 200 full scale originals still exist to this day. It is agile and a strong platform for learning the larger electric airplanes.

What you will need to complete this airplane:

Transmitter / Receiver: You will need a 4-5 channel receiver, depending on how you power the receiver. If using a y-connector for the BEC, then you can use a 4 channel receiver. If not, use a five channel or higher receiver

Servos - You will need four servos.

Power System - You need a 800 Watt electric motor running an 11 - 12 inch propeller.

Battery - Use a either a 14.8V or 18.5V Lipo with 3300mAh.

To power the receiver and servos, you should use a separate Battery Eliminator Circuit that produces 4.8-5 Volts.

Servo Extensions - You will need one 6 inch "Y" connector.

Adhesives - You will need thin and medium CA glue and 5 minute epoxy.

Wing Span	55,1 inch
Wing Area	556 sq in
Length	48 inch
Weight	4.5 pounds ARF Weight
Radio	4-5 Servos
Power	800 Watt Electric / .46 to .56 2S Glow

Bu ürün için taksit yapılmamaktadır.